PHD , Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi

Haq Mu, Jafry AT, Abbasi MS, Jawad M, Ahmad S, Cheema TA, et al. Numerical and experimental spray analysis of castor and jatropha biodiesel under non-evaporating conditions. Energies. 2022;15(20):7808. Haq Mu, Jafry AT, Ahmad S, Cheema TA, Ansari MQ, Abbas N. Recent Advances in Fuel Additives and Their Spray Characteristics for Diesel-Based Blends. Energies. 2022 doi: 10.3390/en15197281. Ahmad S, Jafry AT, Haq Mu, Asif M, Ahmad K, Zafar FU. Experimental study of castor biodiesel ternary blends with ethanol, butanol, diethyl ether and dibutyl ether in a diesel engine. Journal of Thermal Analysis and Calorimetry. 2023;148(3):927-41. Haq Mu, Jafry AT, Ahmad S, Cheema TA, Kamran M, Ajab H, et al. Macroscopic spray behavior in pressurized chamber alongside thermal performance of quaternary castor biodiesel with butanol and 1-butoxybutane. Energy. 2023; 282:128912. Ahmad S, Jafry AT, Haq Mu, Abbas N, Ajab H, Hussain A, et al. Performance and Emission Characteristics of Second-Generation Biodiesel with Oxygenated Additives. Energies. 2023;16(13):5153. Haq Mu, Jafry AT, Cheema TA, Ajab H, Kamran M, Ahmed A, et al. The Influence of Butanol-Acetone (BA) Mixture on Spray and Performance Characteristics of Castor and Pongamia Biodiesel. Waste and Biomass Valorization. 2024. doi: 10.1007/s12649-023-02402-2. Haq M, Turab Jafry A, Ali M, Ajab H, Abbas N, Sajjad U, et al. Influence of nano additives on diesel-biodiesel fuel blends in diesel engine: a spray, performance, and emissions study. Energy Convers Manag: X. 2024;23:100574 Haq M, Turab Jafry A, Khan et al. Investigation of in-nozzle flow behavior coupled with spray characteristics of waste cooking oil and castor biodiesel Energy Conversion and Management: X 2024;24:100787. Haq, M.u., Jafry, A.T. & Khan, W.U. Addition of barium titanate (BaTiO3) and molybdenum disulfide (MoS2) nanoparticles to castor biodiesel for diesel engine application. Journal of Thermal Analysis and Calorimetry (2025). https://doi.org/10.1007/s10973-025-14364-9.

Conferences

ul Haq M, Turab Jafry A et al. “Investigating the macroscopic spray characteristics of Mustard biodiesel in a control volume chamber (CVC),” 6th International Conference on Energy Conservation and Efficiency (ICECE 23), 979-8-3503-3219-3/23/$31.00 ©2023 IEEE ul Haq, Latif, Shafi et al., “Modelling Primary Atomization and its effects on spray Characteristics under Heavy Duty Diesel Engine Condition” 21st Australasian Fluid Mechanics Conference Adelaide, Australia. Haq, M.U.; Jafry, A.T.; Ahmad, S.; Muzaffar, A. Design and Development of a Control Volume Spray Chamber (CVSC) for Fuel Spray Visualization. Eng. Proc. 2022, 23, 35. https://doi.org/10.3390/ engproc2022023035 ul Haq M, Turab Jafry A et al., “Design and analysis of a control volume vessel (CVV) for analysing fuel spray characteristics of Jatropha and Castor oil biodiesel”, International Conference on Advances in Mechanical Engineering, Pakistan, (ICSET22) Muteeb Ul Haq, Saad Ahmad, Ali Turab Jafry, “A numerical investigation of fuel spray characteristics of biodiesel/di-n-butyl-ether blends”, 4th Pak-Turk International Conference on Emerging Technologies in the field of Sciences and Engineering, Pakistan, 3-4th November 2021. Muteeb ul Haq, Saad Ahmad & Ali Turab Jafry, “A CFD approach to investigate the fuel spray characteristics for castor oil biodiesel in a constant volume chamber”, International Conference on Advances in Mechanical Engineering ICAME-21, CUST, Pakistan, 25th August 2021. Muteeb ul Haq, Ali Turab Jafry, Saad Ahmad, Syed Farhad Shah and Gohar Hussain, “Computational approach to analyze the effect of injection and ambient conditions on fuel spray parameters in a piston bowl geometry”, International Conference on Recent Trends in Engineering and Applied Sciences – ICRTEAS-2021, MNS University of Engineering and Technology Multan, Pakistan, 31st March 2021